Languages

NHE-BIG-E 02 – Rivet base detection device with Mycom switch and spindle for 481

NHE-BIG-E 02
Rivet base detection device 
with Mycom switch 
and spindle for 481
NHE-E
Diagnostics
NHE – Rivet based detection device
NHE – Rivet based detection device

The NHE recognizes the rivet projection (U), serves as a hold-down device and helps to reliably recognize components before forming with tolerance errors or missing components. As result of the HPP-25 monitoring capability, inspection of components pre or post forming can be eliminated. Additional inspection Stations can be eliminated and production cost can be reduced.

Additional NHE functions, which can be implemented quickly and safely with the Process Control HPP-25:

  • Primary riveting mode E with HPP-25
  • Integrated Mycom switch with adjustable trigger point
  • Produce constant formed rivet head height ,H' at different component heights
  • Rapid approach / working speed based on the work piece elevation for improved productivity
  • Touch probe acting as a hold-down device on the workpiece base:

    • NHE-Std: up to 10-40N hold-down force. Adaptable to RNE 151-431
    • NHE-Big: up to 20-300N holding force. Adaptable only to RNE 281-481
  • Achieve a constant closing head height, even with 3rd party control
  • Control: HPP-25, RC-30 or 3rd party control

Note: A retrofit may need replacing the length of the forming tool, the form tool holder and the pressure cup – see

  • Model: NHE-BIG-E-02
NHE-BIG-E 02
Rivet base detection device 
with Mycom switch 
and spindle for 481
NHE-E
Diagnostics
NHE – Rivet based detection device
NHE – Rivet based detection device