,
,
Standard Version
REDUCED FORCE
▪ Complete work station
▪ Two identical RNE 181 riveting units (both riveting units cycle simultaneously)
▪ Frame to which riveting units are mounted. Distance between riveting heads adjustable
▪ With riveting units 081 – 231, frame ready to be placed on a work table
▪ Nominal force 3.6 kN @ 6 bar (max. operating pressure)
▪ Rivet shaft up to Ø 4 mm (Steel 370 N/mm2)
▪ Spindle stroke 5 - 30 mm with 0.01mm micrometer scale and mechanical stroke limit
▪ Machine weight: approx. 130 kg (Additional weight of the machine table is 100 kg)
▪ Electro-pneumatic drive – power supply @x@V, @Hz
▪ Permanently lubricated spindle
▪ Pressure cup & tool holder Rp=@mm for forming tool length Ls=@mm
▪ Color: light grey RAL 7035
Including
▪ RC3-010, RC-30 Time Based Control, connections X1, X2, X3, X20, X21, X22. One unit to control both riveting units
▪ RC3-X4-01, Connection X4, incl. two-hand relays, for Emergency-Stop and two-hand control
▪ NSL-2HD-010, two-hand control via push button, w/out emergency-stop
▪ PNP-010-181R, Pneumatic service unit, lubrication and control package for RC-30. One unit to control both riveting units
▪ NZ-201, one adjustable task light, 24 VDC, LED
▪ Manual grease press (is not supplied with automatic spindle lubrication system)
▪ Standard accessories and user manual in the language of destination
Options
▪ RND-050, customized (per application) safety enclosure for CE compliance
▪ RC3-X5-01, Connection X5, incl. PVM Module
▪ RC3-X6-01, Connection X6, external safety / Reset
▪ NZ-039, Automatic spindle lubrication system with lubricant level monitor. One unit to service both riveting units
▪ NSL-2HD-011, Emergency-Stop (push button) for two-hand control
Subject to change.
The measurements for RND machines depend on the stroke, as two machines work horizontally at the same time.
The minimum width measures: 1128 mm
The maximum width measures: 1466 mm
